Skip to content
Talty, TX

Flooring in Talty, TX

All About Floors installs and services floors throughout Talty, one-acre minimum lots and 2,000 sq ft minimum houses along FM 1641, on ground that used to grow cotton.

Spacious vinyl flooring
About Talty

Floors built for Talty homes.

Talty's comprehensive plan sets every residential lot at one acre, requires a minimum 2,000 square feet of dwelling, and calls for 90% brick on the first floor on all four sides. That ordinance produced a particular kind of house, large, brick, well spaced, and mostly built since the farmland started selling to developers around 2000. The town sits at Interstate 20 and FM 1641 in Forney ISD, and locals still give directions off St. Martin's Church and the old gin property.

Talty was legally established when deeds were filed on March 27, 1874, but it did not incorporate until 1999 and only became a city in 2015. Irish Catholic families settled the area, the Laydens, Vaughans and O'Connors among them, and it was known first as Layden's Ridge, later Irish Ridge. The Catholic congregation built St. Martin's Church in 1891. Cotton paid the bills for generations, worked off a gin at the corner of FM 1641 and FM 148; the town's own plan describes fields that turned bright white every fall on black land that gave high yields. Population went from 1,028 in 2000 to 2,500 in 2020 and an estimated 3,048 by 2023.

That farmland sold to developers, and the town wrote rules about what could replace it. R-1 zoning requires one-acre lots with a 150-foot minimum width, 75-foot front setbacks, and no dwelling under 2,000 square feet. The result is Shamrock Ridge, Winners Circle off Exit 493, Founders Place, Hunters Green Estates and the rest, large brick houses on generous acreage rather than the tight tract product a few miles west in Forney.

Contemporary laminate flooring in a closet
Modern laminate flooring
On the ground

What we run into in Talty

For flooring, size changes the job. A 2,500 to 4,000 square foot single-story means long continuous runs with very few walls to break them, so everything gets ordered from one dye lot and the slab has to be genuinely flat before the first plank. Waves that disappear in a small house are visible across a Talty great room. It also means a bigger material order and a longer install, which is why having the same crew on the job from start to finish matters, ours has been together twenty years and we have never subcontracted a job out.

The black land that grew the cotton is Houston Black clay, a Vertisol that swells wet and shrinks dry through the season. On these slabs we leave proper expansion at every perimeter, use crack-isolation membrane under tile, and tell owners to keep a soaker hose running at the foundation through the worst of the summer.

Where we work in Talty

  • Shamrock Ridge
  • Winners Circle
  • Founders Place
  • Hunters Green Estates
  • Quail Creek Bend
  • Layden Farms
  • Friendly Acres
  • Founders Addition

Know the area

  • St. Martin's Catholic Church, built 1891
  • the old cotton gin site at FM 1641 and FM 148
  • Interstate 20 Exit 493
  • Henderson Elementary School on FM 1641
  • Talty Town Hall on Helms Trail
  • 30+ years
  • 1-year labor warranty on all work
Services in Talty

What we install in Talty, TX

Reviews

Talty homeowners

  • "All About Floors is amazing to work with! We recently had our entire flooring replaced and they not only did a wonderful job, the support and aftercare has been top notch! Highly recommend"
    J Shoe2 · via Google
  • "The team at All About Floors did an absolutely phenomenal job repairing a portion of a floor in my clients' home that nobody else would touch. We are so grateful for Patty and her amazing team!"
    Carley Newlin · via Google
Talty FAQs

Flooring in Talty, questions

We have close to 3,000 square feet in one continuous run. How do you keep it looking right?

Two things. First, the whole order comes from a single dye lot and gets racked and blended as we install, so there's no visible batch change halfway across the room. Second, the slab gets flattened properly before we start, grinding highs, filling lows, because on a Talty-sized floor a gentle wave in the concrete reads as a shadow line under raking light from the windows.

Can we put solid hardwood down on our slab?

We'd usually talk you out of it. Talty houses are slab-on-grade on Houston Black clay, and solid wood on slab has to be installed over a plywood layer, which raises the floor height and still reacts to the seasonal moisture swing. Engineered wood gives you the same real wood surface with far more dimensional stability. If your heart is set on solid, we'll explain exactly what it takes first.

Who does the work, and what happens if something goes wrong after?

Our own installers. All About Floors has been doing this for 30 years, the core crew has been together for 20, and we have never subcontracted an installation to anyone. Labor carries a one-year warranty. On a house the size of most Talty builds, the install runs several days, and it's the same faces in your home each of those days rather than a rotating subcontract crew.

Flexible financing available

Wisetack and Synchrony

See financing options

Ready to start your Talty project?

Free in-home estimate, clear pricing, and a crew that shows up when we say we will.

A flooring showroom
Call Now Free Estimate