Skip to content
Countertops, Rockwall, TX

Countertops in Rockwall, TX

Choosing a countertop comes down to three things: what the material does under daily use, where the seams land, and how long you wait between the template and the install. The slab you point at in a showroom is the easy part. What follows is the conversation we have at the Mustang Court showroom before anyone picks a color. Installed by our own crew across Rockwall.

Countertops installed in Rockwall, TX by All About Floors
Why All About Floors in Rockwall

Countertops done right, the first time, in Rockwall.

Homeowners across Rockwall, TX call All About Floors for countertops because every job runs with our own crew, no subcontractors, no surprise charges, and one number to call from first sample to finished floor.

We install countertops across Rockwall and the surrounding area, including Fate, Rowlett, Heath, McLendon-Chisholm.

What's included

  • Quartz, granite and solid surface, templated in your home
  • Template taken after cabinets are set, leveled and secured
  • Seam locations shown to you and agreed before fabrication starts
  • Edge profiles from eased and square through bullnose, ogee and mitered
  • Undermount, drop-in, apron front and integrated sink cutouts
  • Faucet and cooktop openings cut at the shop from the actual model specs
  • Existing tops removed and hauled away on install day
  • One-year labor warranty on the installation
Countertops in Rockwall

Built for Rockwall homes.

Rockwall is the county seat of the smallest county in Texas by area, and its housing stock covers a lot of ground. Chandlers Landing went up on the Lake Ray Hubbard shoreline starting in 1970, two years after the lake was impounded. Stone Creek Estates, Breezy Hill and Waterstone Estates are decades newer. So one week we are pulling fifty-year-old flooring off a lake-club slab, and the next we are measuring a new build off Ridge Road. Our Forney showroom is a short run south, and we bring the samples to you.

Rockwall's shoreline neighborhoods are the oldest work in the city. Lake Ray Hubbard was impounded in 1968 and Chandlers Landing was laid out in 1970, so the custom homes on that peninsula are past fifty years old. Slabs that age are rarely flat by today's standards, and thin click-together vinyl telegraphs every dip and every old thinset ridge. We grind the high spots and pour self-leveler where it is needed rather than floating a floor over a dish and letting it flex until the joints fail.

Rockwall County sits on the Texas Blackland Prairie. The clay under these houses shrinks and swells with moisture, and in a dry summer it opens deep cracks that move what is built on top of it. That is why we leave a real expansion gap at every wall, never pin a floating floor under a cabinet toe kick or a heavy island, and check for hollow spots under existing tile before we agree to leave it in place.

The newer half of town is a different job. Breezy Hill, Caruth Lakes, Stone Creek Estates and Waterstone Estates are subdivision builds with open first floors, and the request is almost always the same: take out the carpet-to-tile transition and run one continuous hard surface from the entry through the kitchen to the back wall. Long uninterrupted runs need a racking plan, boards pulled from several boxes at once so the pattern does not repeat, and material from a single production run.

Two practical notes. Chandlers Landing is guard-gated around the clock, so we send crew names and vehicle details ahead of the first day and again if the schedule shifts. And the streets around the courthouse square and The Harbor get tight during the outdoor music season, so if your house backs onto that, we load in early. Estimates are free, we bring samples to the house so you see them under your own light, and we can usually start within about two days.

Recent work

Countertops jobs near Rockwall

  • A kitchen countertop
Reviews

What homeowners say

  • "All About Floors is amazing to work with! We recently had our entire flooring replaced and they not only did a wonderful job, the support and aftercare has been top notch! Highly recommend"
    J Shoe2 · via Google
  • "The team at All About Floors did an absolutely phenomenal job repairing a portion of a floor in my clients' home that nobody else would touch. We are so grateful for Patty and her amazing team!"
    Carley Newlin · via Google
Rockwall FAQs

Countertops in Rockwall, questions

Can you get into Chandlers Landing and the other gated streets by the lake?

Yes. Chandlers Landing is guard-gated around the clock, so we submit crew names and vehicle details before the first day and update them if the schedule changes. The smaller gated pockets along the shoreline work the same way. Tell us your HOA's process when we come out for the estimate and we will handle the paperwork instead of leaving a crew sitting at a call box.

Our house near the lake is from the 1970s and the slab is not flat. Can we still use luxury vinyl plank?

Usually, but only after prep. Slabs from the Chandlers Landing era have settled and been patched, and thin click flooring reproduces every dip and old thinset ridge underneath it. We grind the high spots, fill the low ones with self-leveler, and only then lay the floor. Skipping that step is what causes the flexing joints and clicking noise people complain about a year later.

Do I have to come to a showroom to choose something?

No. Our showroom is at 10 Mustang Court in Forney and you are welcome there, but for Rockwall jobs we normally bring full sample boxes to the house. Lake-facing rooms take a lot of direct light, and colors read completely differently at home than they do under showroom fixtures. Call (972) 564-5533 and we will set up a free estimate.

Which needs less looking after, quartz or granite?

Quartz, on the sealing question. It is non-porous, so there is no annual routine and no stain risk from a spot you missed. Granite is porous to a degree that depends on the stone and wants periodic resealing. The trade runs the other way on heat: granite takes a hot pan, while quartz can scorch.

Can I avoid having a seam in my kitchen?

Only if every run is shorter than a slab, which rules out most L-shaped kitchens and any long galley. What you can control is placement, and that deserves your attention. We put seams over supported cabinet partitions, keep them clear of the sink where the material is weakest, and show you the locations marked on the template before fabrication begins.

How long between the template and the install?

Generally one to two weeks. That window is fabrication: cutting the slab, shaping and polishing the edge profile, and making the sink and cooktop openings. It cannot be compressed by rushing the shop, and templating early does not help because the cabinets have to be finished and level first.

Flexible financing available

Wisetack and Synchrony

See financing options

Ready to start your Rockwall project?

Free in-home estimate, clear pricing, and a crew that shows up when we say we will.

A flooring showroom
Call Now Free Estimate