Floor removal & demo in Sunnyvale, TX

Usually, yes. Additions are common in Sunnyvale because the acre lots leave room to build, and they rarely land dead level with the original slab. Depending on the size of the gap we either build the subfloor up, feather the slab, or design a clean transition at the doorway. We measure the difference at the estimate so you know which one you are getting before we start.

Frequently more than one layer. Carpet and pad over sheet vinyl, sometimes vinyl over an older vinyl, all of it bonded to the original slab. We would rather pull back a closet corner during the free estimate and see it for ourselves. Knowing the layers tells us the real demo cost, and demo is usually the biggest single variable in an older Sunnyvale house.

Yes. Stoney Creek lots generally start around two-thirds of an acre and the slabs are modern and flat, so those jobs move fast. Homestead Estates is the same story. We work out of the showroom at 10 Mustang Court in Forney, bring full sample boxes to the house rather than chips, and can usually get a job started within about two days.

Occasionally. A floating floor can go over sound, fully bonded tile in some situations. What stops it more often is height. Every inch you add changes door swings, thresholds, the transition into adjoining rooms, the clearance under a dishwasher and the fit of a refrigerator into its opening. You also inherit whatever is wrong with the old floor, flatness and cracks included.

With containment set up properly, most families stay. We build plastic barriers at the openings, seal the registers and returns in the work zone so nothing travels through the ductwork, and grind with vacuum attached at the tool. Expect noise, and expect the work zone off limits during the day. Demolition done without any of that is what people mean when the dust never seems to end.

It might be, and it should be tested rather than guessed at. Nine-inch tile and black cutback adhesive were both common then, and either can contain asbestos. Intact and covered, they are not a hazard. The risk comes from grinding or sanding them dry. We sample and test before anything is disturbed, and a positive result goes to a licensed abatement firm before we return to prep and install.