Skip to content
Hardwood refinishing & sanding, Mesquite, TX

Hardwood refinishing & sanding in Mesquite, TX

A tired hardwood floor is often a millimeter away from looking new. Sanding lifts off the old coating and a very thin layer of wood with it, and what comes back is the floor as it was laid, minus twenty years of scratches and gray traffic lanes. The part that takes judgment is knowing when there is not enough wood left above the tongue to do that, and saying so. Installed by our own crew across Mesquite.

Hardwood refinishing & sanding installed in Mesquite, TX by All About Floors
Why All About Floors in Mesquite

Hardwood refinishing & sanding in Mesquite, done right.

Homeowners across Mesquite, TX call All About Floors for hardwood refinishing & sanding because every job runs with our own crew, no subcontractors, no surprise charges, and one number to call from first sample to finished floor.

We install hardwood refinishing & sanding across Mesquite and the surrounding area, including Sunnyvale, Forney, Heath, Rowlett.

What's included

  • Wear layer measured before a machine touches the floor
  • Screen-and-recoat where a full sand is not warranted
  • Vacuum-containment sanding with sealed doorways and returns
  • Stain samples applied to your own boards
  • Board replacement woven into the field for water and pet damage
  • Waterborne and oil-modified finishes, matte through semi-gloss
  • Stay-off and rug timelines given in writing before we leave
Hardwood refinishing & sanding in Mesquite

Built for Mesquite homes.

Mesquite is a different animal from the Kaufman County towns around our shop. It began as a Texas and Pacific depot in 1873, stayed farmland until after World War II, then went from 1,696 people in 1950 to 27,526 in 1960 and 55,131 in 1970. Today it is a city of roughly 151,000 with Town East Mall, a championship rodeo running since 1958, and I-635, I-30 and U.S. 80 cutting through it. Most of what we install in Mesquite goes over slabs poured fifty and sixty years ago.

Mesquite was a depot town on the Texas and Pacific from 1873 and stayed agricultural until the Dallas suburbs reached it after the war. Then it went vertical: 1,696 people in the 1950 census, 27,526 in 1960, 55,131 in 1970, with annexations pushing the city to 20.6 square miles by 1960. Big Town Mall opened in 1959 as the first enclosed mall in the Southwest. The Mesquite Championship Rodeo started in 1958 and still runs Saturday nights at Mesquite Arena through the summer, and Town East Mall anchors the retail near I-635 and I-30. Opal Lawrence Historical Park, on the National Register, preserves one of the earliest Mesquite farmsteads, and the Florence Ranch Homestead from 1871 predates the town. Devil's Bowl Speedway keeps stock car racing in the city. About 151,000 people live here now.

For a flooring crew, Mesquite is really two cities. The mid-century half, Town East Estates, Skyline, Falcon's Lair, Indian Trails and the older pockets around downtown Mesquite, is ranch houses from the 1960s and 1970s sitting on their original slabs. Palos Verdes followed in 1981. Those slabs have carried two or three generations of flooring: glued-down carpet pad, sheet vinyl, tile beds, tack strip scars along every wall. Getting a modern rigid core plank or large-format tile to lie right on one of them takes real prep, grinding adhesive residue, filling low spots, respecting the control joints and testing moisture on concrete poured before anyone worried much about vapor retarders. That prep is most of the labor, and it is where a cheap bid quietly disappears.

The other half is the late-1990s and 2000s buildout on the east side toward 75181, Creek Crossing Estates, Park at Creek Crossing, Solterra. Those are two-story houses with stair runs, upstairs bedrooms and open downstairs plans, so the questions change entirely: how the stairs get handled, how much sound transmission you will accept overhead, whether engineered or rigid core makes more sense over a wood-framed second floor.

Underneath all of it is the same Blackland Prairie clay that moves slabs across east Dallas County. Our showroom is at 10 Mustang Court in Forney, a straight run east on U.S. 80 and I-20, and we bring samples to the house rather than making you drive it.

Recent work

Hardwood refinishing & sanding jobs near Mesquite

  • Spacious hardwood flooring in a kitchen
Reviews

What homeowners say

  • "All About Floors is amazing to work with! We recently had our entire flooring replaced and they not only did a wonderful job, the support and aftercare has been top notch! Highly recommend"
    J Shoe2 · via Google
  • "The team at All About Floors did an absolutely phenomenal job repairing a portion of a floor in my clients' home that nobody else would touch. We are so grateful for Patty and her amazing team!"
    Carley Newlin · via Google
Mesquite FAQs

Hardwood refinishing & sanding in Mesquite, questions

Our house is from the 1960s. Why is prep such a big part of the quote?

Because a Mesquite slab from that era has usually carried three floors already. Under the current carpet there is often old adhesive, sheet vinyl residue, a tile bed and tack strip damage along every wall, and the concrete itself has moved with the clay for sixty years. Rigid plank and large tile need a flat, clean, dry surface. Grinding, patching and moisture testing is the work that makes the finished floor lie right.

What works best upstairs in the Creek Crossing Estates and Solterra houses?

Those east-side houses from the late 1990s and 2000s are wood-framed on the second floor, so sound is the real question rather than durability. We talk through underlayment, engineered wood versus rigid core, and how the stair run gets handled, because stairs are where a hard-surface job is won or lost. We bring the samples upstairs and let you walk on them before you choose.

Do we have to drive out to Forney to pick flooring?

No. Our showroom is at 10 Mustang Court in Forney, a straight run east on U.S. 80 or I-20, but Mesquite is one of our regular routes and we bring the samples to your house. Estimates are free. Once one is approved we can usually start within about two days, with financing available through Synchrony and Wisetack and a one-year warranty on labor.

Can you refinish one room and leave the rest?

You can, but the seam will show. The same species from the same era darkens at a different rate depending on light, and a fresh finish beside a fifteen-year-old one reads as new against old no matter how the stain is matched. Where a room closes off with a door, we stop cleanly at a threshold. Across an open plan, do the whole field.

Do we have to move out?

Most families stay. With a waterborne finish the odor is mild and clears quickly, and we sequence the work so there is a path to a bedroom and a bathroom. Oil-modified finish is a different story: the smell is strong for several days, and households with infants or birds usually leave. Pets have to be out of the work area entirely, since paw prints in a curing finish are permanent.

Can we change the color of the floor?

Yes, within what the species allows. Red oak carries a pink undertone that fights gray stains, maple and birch blotch unless they are conditioned or water-popped first, and no stain makes a floor lighter than its own bare wood. We sand a section of your floor and lay candidate stains on it, because a sample board of someone else's oak tells you very little.

Flexible financing available

Wisetack and Synchrony

See financing options

Ready to start your Mesquite project?

Free in-home estimate, clear pricing, and a crew that shows up when we say we will.

A flooring showroom
Call Now Free Estimate